표준 상세 조회
Home > 품목별 적용표준 > 표준 상세 조회
표준번호 ES-5945-0001    
품목 보호계전기
표준명(한글) 과전류 계전기
표준명(영문)
제정일 1964-05-13 (제정)
최종 개정 확인일 2017-03-23 (개정)
적용범위 이 규격은 기기 또는 선로의 과부하, 단락 및 지락고장전류를 검출하여 회로를 차단함으로서 해당기기 및 선로를 보호하는데 사용되는 과전류 계전기(이하 계전기라 한다)에 대하여 적용한다.
인용표준(규격) - KS T 1002 (1990) 수송포장 계열 치수
- ES-6110-0008 배전반
- IEC 60068-2-1 (2007) Environmental testing - Part 2-1: Tests - Test A: Cold
- IEC 60068-2-2 (2007) Environmental testing -Part2-2: Tests-Test B: Dry heat requirements
- IEC 60068-2-30 (2005) Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
- IEC 60068-2-78 (2001) Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
- IEC 60255-1(2009) Measuring relays and protection equipment - Part1 : Common requirements
- IEC 60255-5 (2000) Electrical relays Part 5:Insulation coordination for measuring relays and protection equipment-Requirements and tests
- IEC 60255-11 (2008) Measuring relays and protection equipment Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port
- IEC 60255-21-1 (1988) Electrical relays Part 21 : Vibration, shock, bump and seismic tests on measuring relays and protection equipment-Section One: Vibration tests(sinusoidal)
- IEC 60255-21-2 (1988) Electrical relays Part 21 : Vibration, shock, bump and seismic tests on measuring relays and protection equipment-Section Two: Shock and bump tests
- IEC 60255-21-3 (1993) Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 3: Seismic tests
- IEC 60255-26 (2013) Measuring relays and protection equipment ???? Part 26: Electromagnetic compatibility requirements
- IEC 61000-4-18 (2010) Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
- IEEE C 37.90 (2005) Standard for relays and relay systems associated with electric power apparatus
- IEEE C 37.111 (1999) Standard common format for transient data exchange [COMTRADE] for power system
정격구분 3.1 정격주파수 : 60Hz
3.2 CT 2차 정격전류 : 5A
3.3 DC 전원 정격전압 : 125V
주요 시험항목
시험항목 시험 및 검사구분 시험방법
인정 검수
1. 구조 및 치수검사 6.5.1항
2. 절연저항 측정 6.5.2항
3. 동작특성시험 6.5.3항
4. 과부하 내량 시험 6.5.4항
5. 접점용량시험 6.5.5항
6. 전기적 시험 6.5.6항
  (1) 상용주파 내전압시험
  (2) 뇌임펄스 내전압시험
7. EMC 시험 6.5.7항
  (1) 1MHz 버스트 내성 시험
  (2) 3.10.30MHz 버스트 장애시험
  (3) 정전기 방전 내성시험
  (4) 전자기 방사 내성시험
  (5) 전기적 빠른 과도현상 내성시험
  (6) 서지 내성시험
  (7) 무선주파 전도내성 시험
8. 제어전원 이상 시험 6.5.8항
9. 환경시험 6.5.9항
  (1) 진동, 충격 및 지진시험
  (2) 온도성능시험
  (3) 온ㆍ습도시험
10. 환경시험 6.5.10항
  (1) 정격부담 측정시험 -
  (2) 정정기능 시험
표준이력
번호 구분 위원회차수 제/개정일 제안부서 주요개정내용
1 제정 18 1964-05-13 일반사항, 등급, 조작사항, 비고 등
2 개정 20 1969-07-11 일반형 추가
3 개정 53 1973-12-14 적용범위, 종류, 형식, 정격및 특성, 구조, 시험등
4 개정 117 1981-08-01 종류 및 규격폐기
5 개정 - 1989-03-13 적용범위, 종류 및 시방
6 개정 21 1989-03-13 기기도장색 변경
7 개정 270 2006-03-28 Digital type으로 변경, 단락 및 지락과전류 보호기능이 일체화된 규격반영
8 개정 2009_04 2009-12-28 송변전건설처 인용규격 개정 반영 등 표쥰의 유효성 확인
9 개정 2013_02 2013-07-03 엔지니어링처 그린그리드팀 시험사용(3,6,12)개월 → 환경시험 대체, 보호계전기 시험항목 체계정비 및 시험명통일(인용표준 IEC부합화)
10 개정 2013_04 2013-12-31 엔지니어링처 그린그리드팀 서지내성시험 기준 유예기간 적용(2015.6.1 이후 2kV → 4kV)
11 개정 2017_01 2017-03-23 계통계획처 송변전기기부 단락과전류 요소의 동작특성변경
공인검수면제 대상업체 경보전기㈜, 디이시스㈜, 피앤씨테크㈜